Troubleshooting Guide: Whirlpool Dishwasher Not Drying Dishes

Whirlpool Dishwasher Not Drying: Troubleshooting and Solutions

Having a dishwasher that doesn’t dry your dishes properly can be frustrating. After all, the whole point of using a dishwasher is to save time and effort. If you’re experiencing issues with your whirlpool dishwasher not drying, there are several potential causes and solutions to consider. In this article, we will explore common reasons why your Whirlpool dishwasher may not be drying properly and provide troubleshooting tips to help you resolve the issue.

Common Causes of Whirlpool Dishwasher Not Drying

Before diving into the solutions, it’s important to understand the possible causes behind your whirlpool dishwasher not drying. By identifying the root cause, you can effectively troubleshoot and fix the problem. Here are some common reasons why your dishwasher may not be drying:

  • Dishwasher Heated Dry Not Working: One of the most common causes of a whirlpool dishwasher not drying is a malfunctioning heated dry feature. The heated dry function uses a heating element to evaporate the moisture from your dishes. If this feature is not working properly, your dishes will remain wet at the end of the cycle.
  • Dishes Not Arranged Properly: The way you load your dishwasher can also affect the drying performance. If dishes are stacked too closely together or blocking the vents, the hot air may not circulate properly, resulting in wet dishes.
  • Inadequate Rinse Aid: Rinse aid plays a crucial role in the drying process by reducing water spots and promoting faster drying. If your dishwasher’s rinse aid dispenser is empty or set at a low level, it can hinder the drying performance.
  • Water Temperature: The temperature of the water entering your dishwasher can impact the drying process. If the water is not hot enough, it may not effectively evaporate from the dishes during the drying cycle.
  • Faulty Heating Element: A malfunctioning heating element can prevent your dishwasher from reaching the necessary temperature to dry the dishes. Over time, heating elements can wear out or become damaged, requiring replacement.

Troubleshooting Tips for Whirlpool Dishwasher Not Drying

Now that we’ve identified some common causes, let’s explore troubleshooting tips to help you resolve the issue of your whirlpool dishwasher not drying:

1. Check the Dishwasher Heated Dry Function

Start by ensuring that the heated dry function is enabled on your dishwasher. Consult your dishwasher’s user manual to locate the control panel and verify that the heated dry option is selected. If it’s already enabled, try toggling it off and on again to reset the function.

2. Load Dishes Properly

Properly arranging your dishes can significantly improve drying performance. Make sure that dishes are spaced out and not blocking the vents. Avoid overcrowding the dishwasher, as this can prevent hot air from circulating effectively.

3. Check and Refill Rinse Aid

Inspect the rinse aid dispenser in your dishwasher and ensure that it is filled to the recommended level. If it’s empty, refill it with a rinse aid product specifically designed for dishwashers. This will help improve drying performance and reduce water spots on your dishes.

4. Verify Water Temperature

Check the water temperature in your dishwasher by running the hot water at the sink closest to the dishwasher for a few minutes. Measure the temperature with a thermometer. It should be around 120°F (49°C) for optimal drying. If the water is not hot enough, you may need to adjust your water heater settings or seek professional assistance.

5. Inspect and Replace the Heating Element

If all else fails, it’s possible that your dishwasher’s heating element is faulty and needs to be replaced. The heating element is responsible for heating the air inside the dishwasher to aid in the drying process. Consult your dishwasher’s user manual or contact Whirlpool’s customer support for guidance on how to replace the heating element.

Replacement Parts for Whirlpool Dishwasher Not Drying

If you determine that a specific part of your Whirlpool dishwasher is causing the drying issue, you may need to replace it. Whirlpool offers a wide range of replacement parts for their dishwashers, including heating elements, rinse aid dispensers, and control panels. To find the right replacement part for your dishwasher, visit Whirlpool’s official website or contact their customer support for assistance.

When to Call Authorized Service

If you have tried all the troubleshooting tips mentioned above and your Whirlpool dishwasher still doesn’t dry properly, it may be time to call for professional help. Whirlpool has authorized service centers located in many provinces of the United Kingdom. To find the nearest service center, visit Whirlpool’s official website and contact the call center specified. Their trained technicians will be able to diagnose and fix the issue efficiently.


A whirlpool dishwasher not drying can be a frustrating problem, but with the right troubleshooting steps, you can resolve the issue and enjoy dry, spotless dishes once again. By checking the heated dry function, loading dishes properly, using rinse aid, ensuring adequate water temperature, and inspecting the heating element, you can address common causes of poor drying performance. If all else fails, don’t hesitate to reach out to Whirlpool’s authorized service centers for professional assistance. Remember, a properly functioning dishwasher can save you time and effort in your daily routine.

Note: The information written here is collected from the Internet. There is a possibility that it may contain incorrect information, so for the most accurate and up-to-date information, the official website of the company should be visited. Any responsibility arising from wrong information or application does not belong to the site owner.

Leave a Reply

Scroll to Top